021-58997868

021-58997868

产品中心

PRODUCT CENTER

ITO Coated Kodial® Viewports

ITO Coated Kodial® UHV Viewports

An indium tin oxide (ITO) coating applied on the vacuum side surface of these viewports inhibiting the build up of any unwanted electrical charge on the window which would effect applications involving the movement of low energy charged particles inside a UHV system.


在线咨询

联系电话：

021-58997868

Features

Glass sealing technology

No adhesives used during manufacture

HV and UHV compatible

Indium Tin Oxide (ITO) coating

All coated viewports incorporate additional tapped holes to facilitate the attachment of lead glass discs.

Schematic

InSnO2 Coated UHV Viewports
DN TypeODmmOD inchMaterialCoatedHeight mmView Dia mmClear AngleMin PortMaxMaxOrder CodePrice
BAof View*LengthBake Temp °CTemp gradient °C
DN19341.33KodialInSnO27.615.665-35020ZVPZ16C POA 
DN19341.33KodialInSnO27.615.665-35020ZVPZ16CL* POA
DN40702.75KodialInSnO21338982535020ZVPZ38C POA 
DN40702.75KodialInSnO21338982535020ZVPZ38CL* POA 
DN631144.5KodialInSnO217.5631203035020ZVPZ64C POA 
DN631144.5KodialInSnO217.5631203035020ZVPZ64CL* POA 
DN1001526KodialInSnO22089.21223535020ZVPZ100C POA 
DN1001526KodialInSnO22089.21223535020ZVPZ100CL* POA 
DN1502038KodialInSnO2221371403535020ZVPZ150C POA 
DN1502038KodialInSnO2201371403535020ZVPZ150CL* POA 
All dimensions in mm unless otherwise stated.
* Viewing angle in degrees. This figure only applies if the viewport is mounted on a standard ID port that is no longer than the minimum port length.
* L denotes separately supplied lead glass disk, Lead glass disks used in the ZVPZ100 and ZVPZ150 viewports are fully recessed. All others are held above the flange by approximately 6 mm. 
Orders suffixed with L are complete assembled discs fitted to a coated viewport.


产品参数

产品结构图

返回
上一页
Kodial® Viewports 下一页
Fused Silica Quartz Viewport

Copyright © 2021 脉创（上海）实业有限公司 版权所有 备案号：沪ICP备2021037757号-1

  • 首页
  • 联系电话
  • 返回顶部